Shield Schematic: 3.5inch for mega2560 schematic (mcufriend)
Driver datasheet: ILI9327DS V0.06
Touch screen controller: ADS7843 TOUCH SCREEN CONTROLLER
The LCD resolution is 400×240
driver: https://drive.google.com/file/d/0BwNkP4bUgNKWUmE2RGZCSkRaUGc/view 
My Tech notes 
ili9488 plz kindly sent demo program and driver also.
LikeLike
i am looking for more of these screens however my program runs a (ili9481) chip. i did not write the code but need this issue solved…any chance of getting that driver chip?
LikeLike
Hi, the schematic of this display is similar to mine and shows at header JP3 the Arduino Uno power header. Do you know if this 3.3V on this TFT shield/board is actual used. In the schematic it is shown as a label but is not connected to any one. It can not be connected to schematic internal 3.3V coming form the regulator because this would mean a short cut between two power sources. My feeling is that is and auxiliary power source for a non installed chip that I have on my board. Since that chip is not installed it looks like its not needed.
I ask this because I want to use this TFT with a Arduino nano which doesn’t have much 3.3v power on that pin. If it is used i need to implement and extra 3.3V regulator, if not its not needed.
By the way my name is Oscar and am dutch so if you want you can respond in dutch to me.
Regards, groetjes
This is the board i have:
http://www.ebay.com/itm/TFT-3-5-inch-LCD-Display-Touch-Screen-Module-Arduino-UNO-R3-Board-Plug-and-Play-/111687922300
LikeLike